T-POLE BASIC TRIPLE ARM FLAG POLE

The T-Pole® Basic Triple Arm is an aluminum flagpole constructed of a telescopic pole and six banner arms.

The T-Pole® Basic Triple Arm is a telescopic flagpole constructed of six aluminum banner arms and an aluminum pole that adjusts to three heights up to around 18’. It also has three single-reverse or double-sided custom prints, allowing your client to display up to six different images. Setting up this tripod-like flagpole is effortless and can be done in several minutes using the spring buttons to lock the pole into the desired height. Use the included carrying case to store the flagpole’s hardware securely for transport and travel. Because the display features banner arms, your client can use this flagpole just as effectively indoors as it is outdoors. The T-Pole® Basic Triple Arm can be used to mark the finish line of a race or to draw passing traffic to a small business.

The T-Pole® Basic Triple Arm is a sturdy telescopic flagpole solution that weighs 29lb. All three custom prints are available in three fabric choices, including a mesh fabric that requires no hemming and has a slight stretch, and measure almost 4’x13’ each. The prints are finished in either a single-reverse or double-sided layout with grommets across the top, bottom, and left side for mounting. Assembly of this flagpole is quick and easy. Your client begins by joining the banner arms and telescopic pole together. Then attach the custom prints to the hardware with the banner arm clips and pole clips and adjust the pole to the desired height. A variety of base options are available for this flag display, including both indoor and outdoor solutions such as the Water Base and the Cross Base 30”x30”/8lb. The Weight Bag 13gal can add extra weight to the display for outdoor areas. The T-Pole® Basic is available in other models as well, such as the T-Pole® Basic Single Arm, T-Pole® Basic Double Arm, and T-Pole® Basic Parallel Arm.

Print
Size

(3) 3.8′ x 13.1′

Material

Multiflag® – Knitted polyester fabric with excellent through print and high resistance to tearing

Layout & Finishing

Single-reverse – Hemmed sides, left, top and bottom side with header tape wrapped in printed flag material, left side finished with 8 grommets (double grommet at the top), top and bottom side with 4 grommets each
Double-sided – Two prints sewn together with a blocking inner liner, pillow-case style hemmed sides, left, top and bottom side with header tape wrapped in printed flag material, left side finished with 8 grommets (double grommet at the top), top and bottom side with 4 grommets each

HardwarePart Number